![90/10 Copper Nickel Sheet](https://herarman.com/wp-content/uploads/2021/02/Herarman-Packing-Photo-1-300x164.jpg)
90/10 Copper Nickel Sheet ASTM Specification | ASTM B122 UNS C70600, ASME SB122 |
---|---|
Copper Nickel Plate Specification | MSRR, AMS, BS, ASTM B122 / ASME SB122 |
Copper Nickel 90/10 Plate Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36″ X 120″ or 48″ X 144″, Cut to size available |
Thickness | 0.1mm to 100 mm Thk |
Cuni 90/10 Sheet Width | 10-2500mm |
ASTM B122 UNS C70600 Plate AMS | AMS |
90 10 Cu Ni Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Temper | Annealed |
Condition | Polished on both sides |
Cu Ni 90 10 Plate Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
C70600 Plate Stock in form of | Cupro Nickel 90/10 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate Manufacturer and Supplier |
High Quality 90/10 Cupro Nickel Plate | Huge Stock, Timely deliveryRaw Materials CertificateEN 10204/3.1B100% Radiography Test ReportHigh special strength, high melt pointThird Party Inspection Report, etcExcellent corrosive resistance, good thermal resistanceCustomer support after-sales serviceStrict Control from Raw Material to Finished Copper Nickel 90/10 Plate |
ASTM B122 UNS C70600 profiling | To provide a full profiling service we use numerous profiling methods including:Plasma Plate CuttingLaser Plate CuttingOxy-propane Flame Cutting |
Specialized in | Copper Nickel 90/10 Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in widthCopper Nickel 90/10 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in widthCopper Nickel 90/10 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in widthCopper Nickel 90/10 Clad plate: Copper Nickel 90/10 Clad plate is a composite steel plate made by bonding Copper Nickel 90/10 plate, etc |